1/2” plywood cabinet sides are dadoed to receive 1/2” bottoms, I-beams, and cabinet back.
Undermount glides standard. Soft close available as an upgrade option.
Full overlay doors and drawers are standard.
3/4” natural wood veneer finished engineered wood shelves, edgebanded on visible edge. All shelves are adjustable.
1 1/2” solid hardwood face frames, dadoed to receive 1/2” plywood case sides, I-beams, and bottoms. Cabinets over 36” wide will have center mullion.
1/2” plywood cabinet backs are dadoed to receive I-beams and bottoms. 1/2” plywood hanging rail.
1/2” plywood toekick board installed between cabinet end panels. Does not project beyond outside face of end panel. 1/4” matching plywood toe kick cover applied after installation.
5/8” solid hardwood dovetailed drawer box with all sides dadoed to receive 1/4” plywood bottom. 1/4” plywood bottom captured four sides.
High-strength shelf clips. Sides pre-bored for shelf adjustment.
Natural finished wood interiors, not paper or plastic.
Self-closing, 6-way adjustable overlay concealed 1 1/4” hinge, open 110 degrees.